Mission Statement
I think it's important when you are trying to do something is to have a mission statement. My mission around home automation is to have a Jarvis (from Ironman) in the house that will automate things (I will describe this later) around the house. I'd also like to have analytics running on energy consumption so for example when the solar panels are pushing out 10kW and the house is getting hot, it automatically turns the aircon on.
I will be looking at:
Door locks
Door bell
CCTV
Air Conditioning
DownLight Control inc dimmers
Other lamps
Electric Curtains & Blinds
Power Sockets
Music
Video
My house is wired up to the NBN with a good 100mb connection to the internet. I'm currently with iiNet and I'm using their router which seems fine.
If you are going to run everything on a network you better make sure it's a damn good network so I've chosen a Juniper EX2200 48 port POE (Power over Ethernet) with Cat 6 running to any internal ports and also to the AP's. I chose Ubiqui Wireless APs for this job using the UAP-AC-PRO. I chose this one as it has had rave reviews, supports POE (the Lite version uses something different), and has a more advanced management console allowing far more configuration that the standard router bundle you get from your SP. I've already got a NAS backup in the shape of a Synology DS414 and I've now also got a Synology NVR216 dedicated for the Surveillance cameras. For the I've chose Hikvision 4MP POE cameras, again powered by POE to reduce the amount of wires. I went for the DS-2CD2542FWD-IS. This is a mini dome camera with IR and a built in microphone. I'm using Surveillance Station on the Synology box as the Network Video Recorder and DS Cam on my iPhone for the remote live viewer.
So I've got the network sorted to a high standard (no disconnects or down time!). Next to look at the home automation.
I ventured into Amazon Alexa in July 2016 so I was an early adopter of this technology. At present we use it to power off the TV using a Belkin Wemo and for setting timers for the oven - so it's a pretty expensive timer and power switch at the moment but I always had big dreams for it. I needed a voice assistant and Siri has been restricted to an Apple device and Google Home wasn't out. Alexa seemed to fill the gaps and there has been huge growth in support since the original version.
My idea is to put Alexa in the open plan kitchen where it can reach the dining room, kitchen and family room. I will put a Dot in the cinema room, entrance hall, upstairs rumpus and bed 1.
I need to think about what I'd need it for in each room:
Open room:
- close/open curtains
- Dim/brighten/on/off lights
- Set mood lighting
- Good morning (turn on lights - if dark (use sunrise indicator), open curtains downstairs)
- Good night (check garage doors are closed, check front door is locked, turn off all lights downstairs, close all blinds and curtains
Cinema room:
- close/open curtains
- Dim/brighten/on/off lights
- Set mood lighting
- Turn on/off cinema equipment
- Run scenes - Alexa, set the scene for a film (turn on cinema equipment, set mood lighting, close curtains)
Entrance Hall
- turn on/off house lights
Upstairs Rumpus
- close/open curtains
- Dim/brighten/on/off lights
- Set mood lighting
- Turn on/off tv equipment
- Run scenes - Alexa, set the scene for a film (turn on cinema equipment, set mood lighting, close curtains)
- Good morning (turn on lights - if dark (use sunrise indicator), open curtains downstairs)
- Good night (check garage doors are closed, check front door is locked, turn off all lights downstairs, close all blinds and curtains
Bed 1
- close/open curtains
- Dim/brighten/on/off lights
- Set mood lighting
- Turn on/off tv equipment
- Run scenes - Alexa, set the scene for a film (turn on cinema equipment, set mood lighting, close curtains)
- Good morning (open blinds, turn on dimmers to 50% if dark outside)
- Good night (close blinds, 10 seconds later shut off all lights)
Next question, how the hell do we do all this?
Comments
Post a Comment